Aprašymas
The CeramicSpeed bearing set for Campagnolo Ultra-Torque is compatible with original Campagnolo Ultra-Torque press fit bottom bracket cups. It's an 86 mm wide, 41 mm inner diameter shell. With the Campagnolo Ultra-Torque Pree Fit Cups, you're pressing the bearings onto the Campagnolo Ultra-Torque spindle, then fitting the cranks into the bottom bracket.
CeramicSpeed Standard Ceramic Bearings – low friction, high durability
Bearing race material: hardened-steel
For PRESSFIT, bottom bracket type: BB86
For Frame shell size (width): 86.5 mm
For For frame shell inner diameter: 41mm
Compatible with: 25mm spindle cranks, for example, Campagnolo Ultra-Torque
In the box:
2 CeramicSpeed Bearings
CeramicSpeed All Round Grease
Sticker sheet
RELATED TECHNICAL INFORMATION:
CeramicSpeed Standard Ceramic Bearings – put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed Standard Ceramic Bearings typically have frictional drag of 0.3-0.4 watts per set. Thats in the range of a 75% drag reduction compared to standard bottom brackets. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings.
All Round Grease
Designed to suit the maintenance of CeramicSpeed Bearings, the CeramicSpeed All-Round Grease maximizes your bearings lifetime and performance. This type of grease is a low to medium viscosity lubricant and works as the best compromise between friction influence and lifetime. We recommend it for optimal use in dry and sunny weather conditions, where no or very little contamination threatens the bearing. The application covers mostly road riding conditions, however it can be used off-road in the same weather settings, on all types of CeramicSpeed Bearings. When lubricating your bearings, we recommend a fill rate of 60-80%.
Maintenance:
Depending on the riding conditions it is recommended once a year to re-grease your CeramicSpeed Bearings.
If used in very wet or muddy conditions, maintenance might be required more often.
If high pressure washer is used, please do not point jet stream to any of bearings (headset, bottom bracket, wheel hub, full suspension links) as it may wash out the grease.
